Skip to product information

Abyzz A200 DC Controllable Pump (4,400 GPH)

Available for pre-order

The innovative Abyzz A200 pump with its titanium impeller consists of powerful and programmable menu-controlled electronic driver and a sinusoidal three-phase synchronous motor (pump).

The motor operates at an efficiency factor of over 90% which, along with the fact that you can adjust the speed to meet your performance requirements, makes it an energy-saving solution to traditional power hungry higher voltage pumps.

The integrated flushing bearing provides optimum protection against calcification (Calcium Carbonate deposits - CaCO3). In conjunction with the silicon carbide bearings and special hard metal shaft, this feature provides for low-maintenance operations.

The materials used to manufacture all of these components have been carefully selected so as to be harmoniously integrated into the overall design to look great, ensure a long operational lifetime, and meet the most demanding requirements and highest quality standards.

This product was developed and is manufactured in Germany by Venotec.


  • Variable speed range (0 - 100%)
  • MCFS (Menu Controlled Flow Sequencer) for random, wave etc.
  • BOOSTMODE integrated
  • Comprehensive safety functions (e.g. dry run, temperature sensor, and overload protection)
  • Soft startup
  • Bus-enabled interface for peripheral devices
  • Lockable plug contacts
  • Low-noise operation
  • Operating Voltage: 200V


  • BOOSTMODE max flow rate: 4,400 gph / 17,000 lph
  • Normal mode max flow rate: 3,850 gph / 14,500 lph
  • Discharge Flow Speed: max 5.4m/s, nominal 4.6m/s
  • Delivery height: max. 28.6 ft / 8.8 meters
  • Rated input : 4W-400W
  • Input voltage: 110V~ @ 60Hz
  • Operating Voltage: 200V
  • Ambient temperature: 35.5dF - 104dF +2dC...+40dC
  • Maximum operating pressure: 21.75 PSI / 1,5 bar
  • Maximum immersion depth: 6.5 ft / 2 meters
  • Pump cable length: 9.75 ft/ 3m
  • Inlet/outlet connections: 50mm/40mm (suitable for PVC/AVB adhesive fittings)